Skip to main content

Top Ring Bubble Level

Replaces the top ring of our 30mm and 34mm Unimount™, Direct Mount™, Magmount™ and Ultralite™ rings and our 30mm steel rings. Available with integral Angle Degree Indicator mount or as top ring/bubble level only.

The Bubble Level with integral ADI mount (A129) can be turned either way for left- or right-handed actions. The ADI itself must be ordered separately for left-handed (A119) or right-handed (A122) actions to ensure accurate readouts.

 

 

NOTE: Clean all mating surfaces thoroughly before mounting. Use a torque wrench and do not exceed recommended torque values:

Cap Screws:

  • 25 in-lb

MultiMount Rail Screws:

  • 25-in-lb
Part # Description Screws
A270 XTRM - Top Half of Ring w/ Level - 34mm 4 Screw
A271 XTRM - Top Half of Ring w/ Level & ADI Mount - 34mm 4 Screw
A272 XTRM - Top Half of Ring w/ Level - 34mm 6 Screw
A273 XTRM - Top Half of Ring w/ Level & ADI Mount - 34mm 6 Screw
A128 XTRM - Top Half of Ring w/ Level - 30mm 4 Screw
A129 XTRM - Top Half of Ring w/ Level & ADI Mount - 30mm 4 Screw
A359 XTRM - Top Half of Ring w/ Level - 30mm 6 Screw
A360 XTRM - Top Half of Ring w/ Level & ADI Mount - 30mm 6 Screw

To top

Nightforce Angle Degree Indicator

The Nightforce Angle Degree Indicator* takes the guesswork out of uphill and downhill shots. Calibrated in degrees, it gives you an instant readout.  It is currently only available as part of our 30mm top ring bubble level system. It is simple, robust, and requires no batteries. Available in right-hand or left-hand rifle action configurations.

 

NOTE: Clean all mating surfaces thoroughly before mounting. Use a torque wrench and do not exceed recommended torque values:

Cap Screws:

  • 25 in-lb

MultiMount Rail Screws:

  • 25-in-lb

*The illustration used is for visual purposes only, the ring bubble level is sold separately.

Part # Description
A163 XTRM - 1913 Mil-Spec Mount for Angle Degree Indicator

To top

RAP™

Our Ruggedized Accessory Platform (RAP) provides four inches of rail space above your riflescope for mounting of lasers, illumination tools or other accessories.  The RAP is optimized to withstand heavy recoil and still maintain zero with even delicate accessories or sensors.  Designed to fit four- and six-screw X-Treme Duty™ rings and Unimounts.™

 

NOTE: Clean all mating surfaces thoroughly before mounting. Use a torque wrench and do not exceed recommended torque values:

Cap Screws:

  • 25 in-lb

MultiMount Rail Screws:

  • 25-in-lb
Part # Description
A428 XTRM - Ruggedized Accessory Platform - 30mm - 6 Screw W/ Cradle
A427 XTRM - Ruggedized Accessory Platform - 34mm - 6 Screw W/ Cradle

To top

MultiMount™

The Nightforce MultiMount™ was originally designed as a platform for close-range sights to be mounted in conjunction with a primary riflescope.  In practice, the MultiMount offers a user-configurable system that is rock-solid for nearly any accessory that will fit.  Designed to fit 4- and 6-screw X-Treme Duty™ rings. Two Mil. Std. 1913 rails included.

 

NOTE: Clean all mating surfaces thoroughly before mounting. Use a torque wrench and do not exceed recommended torque values:

Cap Screws:

  • 25 in-lb

MultiMount Rail Screws:

  • 25-in-lb
Part # Description
A426 XTRM - MultiMount 34mm - 6 Screw W/ Cradle
A425 XTRM - MultiMount 30mm - 6 Screw W/ Cradle

To top