Skip to main content
Nightforce OpticsNightforce Optics

Free shipping on all online orders over $80!

NIGHTFORCE XTREME-DUTY™ UNIMOUNTS™ AND MAGMOUNTS™

When a tough, reliable mounting system is required without adding substantial weight, the Nightforce Ultralite™ Unimount™/Magmount™ is the answer.  It features a CNC machined 7075-T6 hard anodized aluminum body and titanium beta series crossbolts and jaws. 

This unique design and construction provides the performance of steel at half the weight.

The Nightforce Unimount™/Magmount™ is designed to remain attached to the scope at all times, allowing quick removal and installation on different firearms.

Unimounts™ and Magmounts™ are available for 30 and 34mm riflescopes, and feature a 20 MOA taper (Magmounts are also available with a zero degree taper). The Unimount™/Magmount™ is the ultimate mount for attaching to weapons with an integral Mil. Std. 1913 flat top-type receiver.

Precise tolerances ensure that the riflescope is not subjected to stress, strain, or bending as the ring screws are tightened.  

 

NOTE: Clean all mating surfaces thoroughly before mounting. Use a torque wrench and do not exceed recommended torque values:

Crossbolts:

  • 68 in-lb

Cap Screws:

  • 25 in-lb
Part # Description
A190 XTRM - Unimount™ 1.125" - 20 MOA - 30mm
A191 XTRM - Unimount™ 1.375" - 20 MOA - 30mm
A221 XTRM - Unimount™ 1.5" - 20 MOA - 30mm
A496 XTRM - Unimount™ 1.5" - 0 MOA - 30mm
A465 XTRM - Unimount SR - 30mm -1.35" - 20MOA
A430 XTRM - Unimount SR - 30mm -1.44" - 20MOA
A192 XTRM - Extended Unimount™ 1.375" - 20 MOA - 30mm
A256 XTRM - Magmount™ 1.375" - 0 MOA - 3 Jaw/Nut - 30mm (For firearms with 20 MOA rails)
   
A257 XTRM - Unimount™ 1.44" - 20 MOA - 34mm
A357 XTRM - Unimount™ 1.5" - 20 MOA - 34mm
A497 XTRM - Unimount™ 1.5" - 0 MOA - 34mm
A194 XTRM - Extended Unimount™ 1.44" - 20 MOA - 34mm
A162 XTRM - MagMount™ 1.44" - 0 MOA - 3 Jaw/Nut - 34mm (For fireams with canted rails)
A361 XTRM - Compact Magmount™ 1.5" - 0 MOA - 3 Jaw/Nut - 34mm (For fireams with canted rails)
A362 XTRM - Compact Magmount™ 1.5" - 20 MOA - 34mm

NIGHTFORCE DIRECT MOUNT™

With fewer moving parts, the X-Treme Duty™ Nightforce Direct Mount™ is more reliable and up to 45% lighter in weight than traditional mounting systems. It is, quite simply, the finest mount for Remington 700 actions ever made. The Direct Mount™ one-piece system, built to mount directly to Remington 700 short or long actions, ensures true alignment and maximum strength for precision shooting.
The base and integral rings are CNC machined to precise tolerances from 7075-T6 hard anodized aluminum, providing exceptional strength while reducing weight. The Direct Mount’s 20 MOA taper maximizes internal riflescope adjustment and long-range capability. It incorporates an integral recoil lug which prevents any movement of the base or stress on the screws while subjected to harsh recoil.
The Nightforce Direct Mount™ eliminates most common mounting problems. Alignment concerns vanish, and there is no need for lapping or cants. The entire mounting process is simpler and faster.

 

NOTE: Clean all mating surfaces thoroughly before mounting. Use a torque wrench and do not exceed recommended torque values:

Base Screws:

  • 25 in-lb

Cap Screws:

  • 25 in-lb
Part # Description
A220 XTRM - Direct Mount - Rem 700 SA .885" Low - 20 MOA - 30mm
A103 XTRM - Direct Mount - Rem 700 SA 1.0" Med. - 20 MOA - 30mm
A106 XTRM - Direct Mount - Rem 700 SA 1.125" High - 20 MOA - 30mm
A219 XTRM - Direct Mount - Rem 700 LA .885" Low - 20 MOA - 30mm
A102 XTRM - Direct Mount - Rem 700 LA 1.0" Med. - 20 MOA - 30mm
A105 XTRM - Direct Mount - Rem 700 LA 1.125" High - 20 MOA - 30mm

© Nightforce Optics All Rights Reserved